
Concrete Questions, Answered
Straight answers to what Pasadena homeowners and small businesses ask before they hire a concrete contractor.
Estimates and scheduling
How do I request an estimate?
Call us or send the form on any page. Share what you want to build or fix, roughly how big it is and where it is. We will follow up, look at the site and give you a written scope and price. Estimates are free.
What information helps you estimate faster?
The address or ZIP code, approximate dimensions, whether old concrete needs to come out, what the area will be used for, and any photos. If you have plans, send them. For anything that supports a building, plans are essential.
What decides the price of a concrete project?
Size, thickness, reinforcement, the amount of demolition and haul-off, site access, finish, color and whether anything unusual lies underneath. Because those vary so much, we give written estimates based on your actual site rather than a price per square foot over the phone.
How long will my project take?
Preparation and forming often take a day or two, and the pour and finishing usually happen in one day. After that, the concrete cures. Large projects, demolition, tight access and weather can add time.
What happens if it rains on pour day?
We do not pour into heavy rain. If the forecast looks bad, we move the pour. Light, brief showers are managed differently from a downpour, and we will explain the plan on the day.
Do I need to be home during the work?
Not necessarily, but you should be reachable. It helps to be there at the start to confirm layout and at the end for the walkthrough.
Concrete basics
How long does concrete take to cure?
Concrete hardens quickly but gains strength for weeks. You can usually walk on it after a day or two, put vehicles on a driveway after about a week and expect full design strength at around 28 days. Moisture and temperature during curing affect the result.
How long does concrete last?
Well-built concrete can last for many decades. The base, drainage, reinforcement, joints and how the surface is protected all affect how long it stays in good condition in this climate.
What strength of concrete is used for residential work?
Residential flatwork commonly uses concrete rated around 3,000 to 4,000 psi, with higher strengths for heavier use. Your estimate will state the mix or strength for your project.
Is steel reinforcement really needed?
Steel does not stop concrete from cracking, but it holds cracks tight so slab sections stay aligned. Given Gulf Coast clay, we recommend reinforcement on most slabs, and engineered projects require it.
Why does concrete crack?
Concrete shrinks as it dries, and the ground under it moves. Cracks are most often caused by shrinkage, soil moisture changes, an uneven base, roots, or too much load. Control joints are cut to give cracks a planned place to go.
Does new concrete need to be sealed?
Sealing is optional for plain gray concrete and recommended for colored and stamped concrete. A sealer helps repel stains and protects color. If you want one, it goes on after the concrete has cured.
Pasadena and Gulf Coast conditions
Why does Houston-area clay matter for concrete?
Expansive clay swells with moisture and shrinks as it dries. Slabs ride those changes, which is why a good base, planned joints, reinforcement and drainage matter more here than in regions with stable soils.
Should I water the ground near a new slab?
For a house foundation, some owners water the soil during dry spells to keep moisture even. Doing it unevenly can cause its own problems, so follow your engineer's or builder's advice. Do not water so much that water pools against the slab.
How do live oak roots affect driveways and sidewalks?
Roots grow toward moisture and can lift or crack nearby concrete. Keep new slabs clear of large roots where you can, and consult an arborist before cutting significant roots, since that can harm the tree.
Do I need city or HOA approval for concrete work?
It depends on the project and your address. Work in the public right-of-way, slabs supporting buildings and many foundations commonly need permits, and subdivisions may have HOA rules. We point out what to check, and you should confirm with the City of Pasadena or your HOA.
Does summer heat affect new concrete?
Yes. Hot, sunny, windy weather can make concrete set quickly and dry too fast at the surface. Pours are timed for cooler parts of the day, finishing is done promptly and curing is protected.
Can concrete handle Gulf Coast storms and flooding?
Concrete is durable in wet weather, but a washed-out or saturated base can undermine it. Good grading and drainage help the slab survive. Concrete under floodwater should be checked afterward for settlement or undermining.
Care and maintenance
How do I clean concrete?
Sweep regularly, rinse with a hose and use a mild detergent with a stiff brush for stains. A pressure washer on a low setting and a wide tip can handle dirt and mildew, but a close, high-pressure tip can scar the surface.
How do I remove oil stains?
Blot fresh spills, apply an absorbent such as kitty litter, and then use a degreaser made for concrete. Old stains may need repeat treatment. Sealed concrete resists stains better.
When should I re-seal concrete?
Sealed surfaces generally need re-sealing every few years, depending on the sealer, sun and traffic. Water that no longer beads on the surface is a sign that it is time.
Can I use chemicals or de-icers on my concrete?
Avoid harsh chemicals and acids unless a product is made for concrete. De-icing salts are rarely needed in Pasadena, but fertilizers and cleaners can also damage the surface if left on it.
Working with us
Do you do residential and commercial work?
Yes. We handle residential projects and light commercial flatwork. Large industrial or big-site paving projects are outside what we do.
Can you work from my plans?
Yes. For foundations and many commercial projects, plans from an engineer, architect or designer are essential. We review them with you, ask about anything unclear and build to them.
What if I am not sure what I need?
Call or send the form with a description or photos. We will help you figure out whether you need a repair, a replacement or something new, and explain the options.
Do you offer free estimates?
Yes. Estimates are free for projects in our service area.
Looking for something specific? Browse our concrete services, see the Pasadena service area, or contact us.
Still have a question? Ask us.
Call or send the form and we will answer your questions and give you a free estimate.
- Residential and light commercial projects
- Pasadena, Deer Park, La Porte, South Houston, Baytown and Pearland
- Clear scope so you know what is included
Request your free estimate
Tell us a little about the project. We will contact you using the phone number you provide.